IPv4 PA space is the most professional way for starting with your own address space. Even though IPv6 deployment is growing quickly and it is recommended that you get IPv6 space aswell, IPv4 is currently the only way to guarantee full reachability for all your customers. You are allowed to use this address space anywhere within the RIPE service area. IPv4 PA space from SnapServ Mathis offers you an easy way to get started without having to pay overpriced fees.

Additional Terms and Conditions
The following Terms and Conditions extend our base Terms and Conditions available at www.snapserv.ch.

• You will receive a SUB-ALLOCATED PA object at RIPE, which offers you the ability to create your own assignments.
• You must provide us with some kind of identity proof, e.g.: company registration papers or passport scan.
• You must notify us in case of any changes to your customer data.
• You must ensure that all data within the RIPE database is valid and up-to-date at all time.
• You must document your address space usage properly according to the official RIPE guidelines.
• You must not use these ranges for any forbidden activities, including but not limited to:
  • Any form of spamming or bulk mailing
  • Copyright infringing activities
  • Torrent directories or trackers linking to copyrighted content
  • Denial of Service attacks
  • Tor entry, relay and exit nodes
  • Utilizing the service in any manner that violates applicable law.
• You must pay a penalty fee of CHF 10.- per IP address, if you cancel the service and one or more addresses within your allocated space are blacklisted according to zen.spamhaus.org.
• No refunds are being offered, service is cancellable at the end of the month.

IPv6 PA space from RIPE offers you a cheap and flexible way to get started with your own address space. You will be able to make assignments by yourself (e.g.: IP SWIP for your customers) and are allowed to announce this subnet anywhere within the RIPE service area. We will provide you with all the necessary support to get you started and are always willing to help if a problem should occur.We currently offer 5 different subnet sizes to choose from, depending on your needs.

Additional Terms and Conditions
The following Terms and Conditions extend our base Terms and Conditions available at www.snapserv.ch.

• You will receive a ALLOCATED-BY-LIR object with your ordered size at RIPE, which offers you the ability to create your own assignments.
• You must not make any assignments larger than /48 in total per customer without contacting us.
• You must provide us with some kind of identity proof, e.g.: company registration papers or passport scan.
• You must notify us in case of any changes to your customer data.
• You must ensure that all data within the RIPE database is valid and up-to-date at all time.
• You must document your address space usage properly according to the official RIPE guidelines.
• You must not use these ranges for any forbidden activities, including but not limited to:
  • Any form of spamming or bulk mailing
  • Copyright infringing activities
  • Torrent directories or trackers linking to copyrighted content
  • Denial of Service attacks
  • Tor entry, relay and exit nodes
  • Utilizing the service in any manner that violates applicable law.
• No refunds are being offered, service is cancellable at the end of the month.

Pricing (subnet size from /44 to /40):

• /44 IPv6 subnet: EUR 24.99 / year
• /43 IPv6 subnet: EUR 49.99 / year
• /42 IPv6 subnet: EUR 74.99 / year
• /41 IPv6 subnet: EUR 99.99 / year
• /40 IPv6 subnet: EUR 124.99 / year

IPv6 PI space is a great possibility to get started with your very own address space - if you should ever need/want to switch the sponsoring LIR, you can do so at any time, as it is your property. We will assist you in requesting such IPv6 space from RIPE and will serve as your sponsoring LIR. Any subnet size (minimum /48) is theoretically possible and does not influence the yearly price - however, the RIPE regulations are quite strict and you always need to justify your request. You are allowed to use this IP space anywhere within the RIPE service area, however you can not create further subassignments, as PI space is only meant for you as an end user, and not for customers.

Additional Terms and Conditions
The following Terms and Conditions extend our base Terms and Conditions available at www.snapserv.ch.

• You will receive your own PI space assignment from RIPE.
• You must not use this space for customers / other people, as it is only meant for you as an end user.
• You must sign an end user assignment agreement provided by us.
• You must provide us with some kind of identity proof, e.g.: company registration papers or passport scan.
• You must notify us in case of any changes to your customer data.
• You must ensure that all data within the RIPE database is valid and up-to-date at all time.
• You are fully responsible for this space and can move it to another sponsoring LIR at any time.
• No refunds are being offered, with the exception of rejected requests (only happens if you insist on a too big subnet size which RIPE does not accept) which will grant you a 75% refund.
• Service is cancellable till September 30 each year - if cancelled afterwards, you will have to pay the fee for another year due to RIPEs PI charging scheme.

If you don't just want to have your own address space, but also prefer having full control over your routing or multihoming is a requirement for you, an ASN (Autonomous System Number) will suit your needs perfectly. You will receive your own 16-bit (needs justification) or 32-bit ASN from RIPE and are then able to announce whatever you want to your BGP peers. We will serve as your sponsoring LIR, but the ASN itself is your property - you can transfer it to any other sponsoring LIR at any given point in time. If you should be unhappy with your current sponsoring LIR, we also offer ASN transfers for a cheap price. The RIPE NCC does currently not charge a recurring holding fee for autonomous system numbers (ASNs). Should the RIPE NCC decide to change their pricing scheme, SnapServ Mathis will only charge 10% on top of the RIPE NCC base fee.

Additional Terms and Conditions
The following Terms and Conditions extend our base Terms and Conditions available at www.snapserv.ch.

• You will receive your own ASN from RIPE with us a sponsoring LIR.
• You are granted a 25% discount (total price: CHF 75.-) if you are transferring an existing ASN to us.
• You must sign an end user assignment agreement provided by us.
• You must provide us with some kind of identity proof, e.g.: company registration papers or passport scan.
• You must notify us in case of any changes to your customer data.
• You must ensure that all data within the RIPE database is valid and up-to-date at all time.
• No refunds are being offered, with the exception of rejected requests, which will grant you a 75% refund.
• Service is cancellable till September 30 each year - if cancelled afterwards, you will have to pay the fee (if RIPE should start charging recurring fees) for another year due to RIPEs PI charging scheme.

This all-in-one bundle provides you with all the required resources to get started with deploying your own IPv6 network based on RIPE resources. It consists of these three packages:

• RIPE - IPv6 PI Space (size /48 or larger, depends on justification)
• RIPE - IPv6 PA Space (size /40)
• RIPE - Autonomous System Number (newly issued/sponsoring LIR transfer)

Please read the respective descriptions of each package individually for further information.

SnapServ Mathis is offering free IPv6 BGP tunnels for research / education purposes to a select amount of people. Order this free service, provide us with your contact data and fill out the application form. We will contact you within a few days by either accepting or declining your request. The tunnel itself will work by adding IPv6 addresses (we will provide an appropriate subnet) onto a GRE tunnel between your and our router, which will then be used for establishing an BGP session. Prefix filters will be automatically generated based on your IRR data every night - we do not accept any AS-SETs by default and will stick to generating filters based on your ASN. Please use core2.fra1.ssx.li for latency tests before submitting your order.

Additional Terms and Conditions
The following Terms and Conditions extend our base Terms and Conditions available at www.snapserv.ch.

• You will receive a free IPv6 BGP tunnel for education/research purposes.
• You must acknowledge that this is a free fair-use and best-effort service provided by us - there are no guarantees at all.
• You must acknowledge that we reserve the right to cancel your tunnel at any time if we should detect abuse/fraudulent activity.
• You must agree to keep your bandwidth usage at a minimum, otherwise we might throttle or shut the peering temporarily.
• You must agree to react to abuse notices within 24 hours, otherwise we might temporarily shut down your tunnel if required.
• You must agree to our peering policy, which is available at www.as200753.net.

PLEASE NOTE: We are currently not setting up any new tunnels, however you can still register for one and your request will be processed with the next batch of tunnel signups. Due to the massive amount of requests and limited capacity this might currently take several months.